Manufacturer: http://www.stantondj.com
Productpage: http://www.enterthesystem.com/system/scs3d/
Supported in Deckadance since: 1.40.4
Stanton SCS-3D/DaScratch
Return to “Deckadance MIDI Controller Reference List”
[You can only see part of this thread as you are not logged in to the forums]
-
- Site Admin
- Wed Nov 19, 2008 6:03 pm
Stanton SCS-3D/DaScratch
- Attachments
-
- stanton_scs_3d_dascratch_controller_3.jpg (38.59 KiB) Viewed 7707 times
[html]
<h2>Configuration Instructions</h2>
<p>(0) Connect the SCS.3d to your computer.</p>
<p>(1) Start DaRouter software and select "GEN Single SCS.3d Dual Virtual V1.00" in the active preset dropdown selector.</p>
<p>(2) Start Deckadance software and enter in the "SETUP" window.</p>
<p>(3) Enable in the midi interface list "INPUT: FROM DAROUTER" (...make sure that it's on) and select the SCS.3d in "REMOTE CONTROLLER DEVICE".</p>
<p>(4) Enjoy. Don't forget to read the explanation of the mapping below.</p>
<h2>Global Controls</h2>
<p>The center section of DaScratch switches its function based on which mode is selected. Certain buttons never change their function and are referred to “Global Controls”. Global controls are controls whose function doesn't change when the mode is changed. We'll start with the mode switching section…</p>
<table cellspacing="0" cellpadding="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/image004.jpg" height="206" width="250"></td>
<td>
<p><b>FX</b> - Sets 3 slider mode</p>
<p><b>EQ</b> - Sets 3 slider mode</p>
<p><b>LOOP</b> - Sets Button mode</p>
<p><b>TRIG</b> - Sets Button mode</p>
<p><b>VINYL</b> - Sets "Circle" mode</p>
<p><b>DECK</b> - Switch the unit from deck A to deck B</p>
<p>Below is a list of the global controls.</p>
<p><b>PLAY</b> - Play/Pause</p>
<p><b>CUE</b> - Cue/Stutter</p>
<p><b>SYNC</b> - Sync</p>
<p><b>TAP</b> - Tap tempo of the selected deck</p>
</td>
</tr>
</table>
<h2>Vinyl Mode</h2>
<p>When activated, this mode puts the SCS.3d into “circle mode”.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td>
<img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/01.gif" height="466" width="259">
</td>
<td>
<h3>SLIDERS</h3>
<p><b>S1</b> - Deck Volume<br />
<b>S2</b> - Deck Pitch<br />
<b>S4 </b>- Deck Scratch<br />
<b>C1 </b>- Deck Pitch Bend Nudge</p>
<h3>BUTTONS</h3>
<p><b>B11</b> - Jump 1 Beat Backward<br />
<b>B12</b> - Jump 1 Beat Forward<br />
<b>B13</b> - Jump 1 Bar Backward<br />
<b>B14</b> - Jump 1 Bar Forward</p>
</td>
</tr>
</table>
<h2>Loop Mode</h2>
<p>This preset puts the SCS.3d into button mode.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/02.gif" height="466" width="259"></td>
<td>
<h3>SLIDERS</h3>
<p><b>S1</b> - Deck Volume<br />
<b>S2</b> - Deck Pitch<br /></p>
<h3>BUTTONS</h3>
<p><b>B1</b> - Deck Loop<br />
<b>B2</b> - Deck Leap<br />
<b>B3</b> - Deck Loop Size Decrement (Half)<br />
<b>B4</b> - Deck Loop Size Increment (Double)<br />
<b>B5</b> - Deck Loop Snap Mode<br />
<b>B11</b> - Loop Move 1 Beat Backward<br />
<b>B12</b> - Loop Move 1 Beat Forward<br />
<b>B13</b> - Loop Move 1 Bar Backward<br />
<b>B14</b> - Loop Move 1 Bar Forward</p>
</td>
</tr>
</table>
<h3>Trigger Mode</h3>
<p>Trigger mode is another button mode preset.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/image006.jpg" height="467" width="259"></td>
<td>
<h3>SLIDERS</h3>
<p><b>S1</b> - Deck Volume<br />
<b>S2</b> - Deck Pitch<br /></p>
<h3>BUTTONS</h3>
<p>B1 - Jump to Cue Point #1<br />
B2 - Jump to Cue Point #2<br />
B3 - Jump to Cue Point #3<br />
B4 - Jump to Cue Point #4<br />
B5 - N/A (...free for user)<br />
B11 - Set Cue Point #1<br />
B12 - Set Cue Point #2<br />
B13 - Set Cue Point #3<br />
B14 - Set Cue Point #4</p>
</td>
</tr>
</table>
<h2>FX Mode</h2>
<p>When activated, FX mode puts the SCS.3d into “3 slider mode”, which turns the control circle into 3 virtual faders.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/image007.jpg" height="467" width="259"></td>
<td>
<h3>SLIDERS</h3>
<p>S1 - Deck Volume<br />
S2 - Deck Pitch<br />
S3 - FX Depth<br />
S4 - FX Select<br />
S5 - FX Dry/Wet</p>
<h3>BUTTONS</h3>
<p>B11 - Master FX WAH-WAH Filter<br />
B12 - Master FX Panoramic LFO<br />
B13 - Master FX Ring Modulator<br />
B14 - Master FX Track Coder<br />
</td>
</tr>
</table>
<h2>EQ Mode</h2>
<p>This is another 3 slider mode preset.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/04.gif" height="466" width="259"></td>
<td>
<h3>SLIDERS</h3>
<p><b>S1</b> - Deck Volume<br />
<b>S2</b> - Deck Pitch<br />
<b>S3 </b>- Deck Low Eq<br />
<b>S4</b> - Deck Mid Eq<br />
<b>S5</b> - Deck High Eq</p>
<h3>BUTTONS</h3>
<p><b>B11</b> - Mid Eq Kill<br />
<b>B12</b> - High Eq Kill<br />
<b>B13</b> - Low Eq Kill<br />
<b>B14</b> - Reset Eq sliders</p>
</td>
</tr>
</table>
[/html]
<h2>Configuration Instructions</h2>
<p>(0) Connect the SCS.3d to your computer.</p>
<p>(1) Start DaRouter software and select "GEN Single SCS.3d Dual Virtual V1.00" in the active preset dropdown selector.</p>
<p>(2) Start Deckadance software and enter in the "SETUP" window.</p>
<p>(3) Enable in the midi interface list "INPUT: FROM DAROUTER" (...make sure that it's on) and select the SCS.3d in "REMOTE CONTROLLER DEVICE".</p>
<p>(4) Enjoy. Don't forget to read the explanation of the mapping below.</p>
<h2>Global Controls</h2>
<p>The center section of DaScratch switches its function based on which mode is selected. Certain buttons never change their function and are referred to “Global Controls”. Global controls are controls whose function doesn't change when the mode is changed. We'll start with the mode switching section…</p>
<table cellspacing="0" cellpadding="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/image004.jpg" height="206" width="250"></td>
<td>
<p><b>FX</b> - Sets 3 slider mode</p>
<p><b>EQ</b> - Sets 3 slider mode</p>
<p><b>LOOP</b> - Sets Button mode</p>
<p><b>TRIG</b> - Sets Button mode</p>
<p><b>VINYL</b> - Sets "Circle" mode</p>
<p><b>DECK</b> - Switch the unit from deck A to deck B</p>
<p>Below is a list of the global controls.</p>
<p><b>PLAY</b> - Play/Pause</p>
<p><b>CUE</b> - Cue/Stutter</p>
<p><b>SYNC</b> - Sync</p>
<p><b>TAP</b> - Tap tempo of the selected deck</p>
</td>
</tr>
</table>
<h2>Vinyl Mode</h2>
<p>When activated, this mode puts the SCS.3d into “circle mode”.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td>
<img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/01.gif" height="466" width="259">
</td>
<td>
<h3>SLIDERS</h3>
<p><b>S1</b> - Deck Volume<br />
<b>S2</b> - Deck Pitch<br />
<b>S4 </b>- Deck Scratch<br />
<b>C1 </b>- Deck Pitch Bend Nudge</p>
<h3>BUTTONS</h3>
<p><b>B11</b> - Jump 1 Beat Backward<br />
<b>B12</b> - Jump 1 Beat Forward<br />
<b>B13</b> - Jump 1 Bar Backward<br />
<b>B14</b> - Jump 1 Bar Forward</p>
</td>
</tr>
</table>
<h2>Loop Mode</h2>
<p>This preset puts the SCS.3d into button mode.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/02.gif" height="466" width="259"></td>
<td>
<h3>SLIDERS</h3>
<p><b>S1</b> - Deck Volume<br />
<b>S2</b> - Deck Pitch<br /></p>
<h3>BUTTONS</h3>
<p><b>B1</b> - Deck Loop<br />
<b>B2</b> - Deck Leap<br />
<b>B3</b> - Deck Loop Size Decrement (Half)<br />
<b>B4</b> - Deck Loop Size Increment (Double)<br />
<b>B5</b> - Deck Loop Snap Mode<br />
<b>B11</b> - Loop Move 1 Beat Backward<br />
<b>B12</b> - Loop Move 1 Beat Forward<br />
<b>B13</b> - Loop Move 1 Bar Backward<br />
<b>B14</b> - Loop Move 1 Bar Forward</p>
</td>
</tr>
</table>
<h3>Trigger Mode</h3>
<p>Trigger mode is another button mode preset.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/image006.jpg" height="467" width="259"></td>
<td>
<h3>SLIDERS</h3>
<p><b>S1</b> - Deck Volume<br />
<b>S2</b> - Deck Pitch<br /></p>
<h3>BUTTONS</h3>
<p>B1 - Jump to Cue Point #1<br />
B2 - Jump to Cue Point #2<br />
B3 - Jump to Cue Point #3<br />
B4 - Jump to Cue Point #4<br />
B5 - N/A (...free for user)<br />
B11 - Set Cue Point #1<br />
B12 - Set Cue Point #2<br />
B13 - Set Cue Point #3<br />
B14 - Set Cue Point #4</p>
</td>
</tr>
</table>
<h2>FX Mode</h2>
<p>When activated, FX mode puts the SCS.3d into “3 slider mode”, which turns the control circle into 3 virtual faders.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/image007.jpg" height="467" width="259"></td>
<td>
<h3>SLIDERS</h3>
<p>S1 - Deck Volume<br />
S2 - Deck Pitch<br />
S3 - FX Depth<br />
S4 - FX Select<br />
S5 - FX Dry/Wet</p>
<h3>BUTTONS</h3>
<p>B11 - Master FX WAH-WAH Filter<br />
B12 - Master FX Panoramic LFO<br />
B13 - Master FX Ring Modulator<br />
B14 - Master FX Track Coder<br />
</td>
</tr>
</table>
<h2>EQ Mode</h2>
<p>This is another 3 slider mode preset.</p>
<table cellpadding="0" cellspacing="0" class="all_top">
<tr>
<td><img src="http://www.enterthesystem.com/downloads/html/Generic%20Preset%20Explanation_files/04.gif" height="466" width="259"></td>
<td>
<h3>SLIDERS</h3>
<p><b>S1</b> - Deck Volume<br />
<b>S2</b> - Deck Pitch<br />
<b>S3 </b>- Deck Low Eq<br />
<b>S4</b> - Deck Mid Eq<br />
<b>S5</b> - Deck High Eq</p>
<h3>BUTTONS</h3>
<p><b>B11</b> - Mid Eq Kill<br />
<b>B12</b> - High Eq Kill<br />
<b>B13</b> - Low Eq Kill<br />
<b>B14</b> - Reset Eq sliders</p>
</td>
</tr>
</table>
[/html]
L.S.D @ Image-Line Software - Deckadance