Arturia Minilab Knob Problem

Discuss MIDI Controller support/issues here

Return to “MIDI Controller Support”

[You can only see part of this thread as you are not logged in to the forums]
burp27
Thu Dec 26, 2013 12:59 pm

x

Arturia Minilab Knob Problem

Hello,

First off, i'm new to the forums. So excuse me if I post anything in the wrong section or whatever :)
Anyway. I recently got my Arturia Minilab MIDI Controller. I got it all set up and FL recognized the controller. Problem is, when I try to link a hardware knob to an FL knob, the FL knob switches back to 50% of the knob.

Example: I link hardware knob 1 to parameter A in FL. The link works. But, when I twist knob 1 any direction, parameter A will only twist slightly to the left or right (depending on my own movement) and reverts automatically.

At first I thought this could be because of the knobs on my controller. These can be twisted infinitely. But when I try to link parameter A to an equalizer knob from my DDJ-ERGO, (which cannnot twist all the way around) the parameter A works perfect, without reverting to the 50% of the value.

I hope I have made my problem clear enough to understand, And that I used the correct terms :P

Thanks in advance!

Dave12
Thu Jan 09, 2014 2:03 am

x

Re: Arturia Minilab Knob Problem

Shift and number 1 pad (or 3,4,5,6,7,8) when us...

burp27
Thu Jan 09, 2014 3:48 pm

x

Re: Arturia Minilab Knob Problem

Thanks a lot Dave!! It worked when I did Shift ...

JDS6471
Fri Jan 20, 2017 3:24 am

x

Re: Arturia Minilab Knob Problem

I am grateful for this question and answer. Th...

Delshad1987
Fri Mar 03, 2017 6:32 am

x

Re: Arturia Minilab Knob Problem

4 years later and this thread still came in han...

DrewSan8909
Sat Mar 04, 2017 7:31 am

x

Re: Arturia Minilab Knob Problem

What do you mean by pad 1 through 8? Do you mea...

XSMusic
Fri Nov 03, 2017 2:25 am

x

Re: Arturia Minilab Knob Problem

Shift on Minilab. Pad{1-8} Mine was pad 3. No...

LLLtheguy
Wed Mar 20, 2019 8:29 pm

x

Re: Arturia Minilab Knob Problem

im getting really frustrated.... when using the...

Philth
Tue Mar 26, 2019 3:51 am

x

Re: Arturia Minilab Knob Problem

To get Analog Lab to work with the knobs like i...
You do not have the required permissions to view the files attached to this post.

zacharysmiley
Mon Apr 01, 2019 1:47 pm

x

Re: Arturia Minilab Knob Problem

I tried to set my Pad # notes to all C5, they a...

zacharysmiley
Thu Apr 04, 2019 12:40 pm

x

Re: Arturia Minilab Knob Problem

what about the pads? when I press any of the pa...

LLLtheguy
Thu Apr 18, 2019 11:17 am

x

Re: Arturia Minilab Knob Problem

Philth wrote:To get Analog Lab to work with the...

Philth
Fri Apr 26, 2019 3:56 pm

x

Re: Arturia Minilab Knob Problem

That error means that on the left, you don't ha...

OwlyPants
Fri Nov 01, 2019 10:22 pm

x

Re: Arturia Minilab Knob Problem

Philth wrote: ↑Tue Mar 26, 2019 3:51 am To get ...

bruvoa
Sat Apr 25, 2020 6:51 pm

x

Re: Arturia Minilab Knob Problem

OwlyPants wrote: ↑Fri Nov 01, 2019 10:22 pm Phi...

BroghanC
Thu Jul 15, 2021 2:31 am

x

Re: Arturia Minilab Knob Problem

Philth wrote: ↑Tue Mar 26, 2019 3:51 am To get ...

kosta-s
Mon Feb 21, 2022 1:42 pm

x

Re: Arturia Minilab Knob Problem

If you select "Input port" 1 because your MIDI ...


Return to “MIDI Controller Support”