Hercules DJControl AIR+ Script

Get support here - http://support.image-line.com/redirect/Gibson-Stanton-Deckadance

Return to “DeckaScripting”

Forum rules
Deckadance is no longer an Image-Line product. For support please go here - http://support.image-line.com/redirect/Gibson-Stanton-Deckadance
[You can only see part of this thread as you are not logged in to the forums]
nucleon
Mon Aug 05, 2013 1:30 pm

0 x

Hercules DJControl AIR+ Script

Hercules DJControl AIR Plus.jpg




Use 7-Bit MIDI resolution mode in its own software settings.

Decks:

Sync = Sync lock.
Cue = Stutter Cue point (Retrigger playback, hold and press play to continue).
Play = Play/Pause.

Jog (Vinyl Button On) = Scratch playback (dont push down for pitch bend only).
Jog (Vinyl Button Off) = Pitch bend (push down for stronger pitch bend).
Pitch Fader = Tempo.

Pads Sample Mode:

Pad 1 = Trigger Sampler 1 (Sampler 5 on Deck B).
Pad 2 = Trigger Sampler 2 (Sampler 6 on Deck B).
Pad 3 = Trigger Sampler 3 (Sampler 7 on Deck B).
Pad 4 = Trigger Sampler 4 (Sampler 8 on Deck B).

Shift + Pad 1 = Trigger Gross Beat Slot 1.
Shift + Pad 2 = Trigger Gross Beat Slot 2.
Shift + Pad 3 = Trigger Gross Beat Slot 3.
Shift + Pad 4 = Trigger Gross Beat Slot 4.

Pads Cue Mode:

Pad 1 = Set and trigger Hot Cue 1.
Pad 2 = Set and trigger Hot Cue 2.
Pad 3 = Set and trigger Hot Cue 3.
Pad 4 = Set and trigger Hot Cue 4.

Shift + Pad 1 = Delete Hot Cue 1.
Shift + Pad 2 = Delete Hot Cue 2.
Shift + Pad 3 = Delete Hot Cue 3.
Shift + Pad 4 = Delete Hot Cue 4.

Fx/Loop Bank 1:

Button 1 = Loop on/off (when you end looping playback resumes from end of loop).
Button 2 = Leap on/off (when you end looping playback resumes from where it would have been without looping).
Button 3 = Half loop size.
Button 4 = Double loop size.

Shift + Button 3 = Move loop left (when no loop or leap enabled moves playback position).
Shift + Button 4 = Move loop right (when no loop or leap enabled moves playback position).

Fx/Loop Bank 2:

Button 1 = FX1 on/off
Button 2 = FX2 on/off
Button 3 = FX3 on/off
Button 4 = FX wet signal bass cut.

Gain Knob:

Filter Button on = Filter.
Filter Button off = Gain.

Mixer:

Trebble Knob = High EQ.
Middle Knob = Mid EQ.
Bass Knob = Bass EQ.

Shift + Trebble Knob = FX 1 LFO speed.
Shift + Middle Knob = FX 2 LFO speed.
Shift + Bass Knob = FX 3 LFO speed.

Vinyl Button = Activate scratch mode for Jog wheels.
Magic Button = Snap and Quantize.
Mic Button = Activate microphone input (in hardware).
Rec Button = Unused.
Beats LEDs = Deck audio peak meters not beat indicators.
Browser Konb = Playlist up/down.
Browser Knob push down and turn = Directory up/down.
Cue Button = Switch monitor cue level to max.
Mix Button = Switch monitor cue mix to 50%.
Other controls as labeled.

SCRIPT

hercules_dj_control_air_plus.c
You do not have the required permissions to view the files attached to this post.

DJ Phatso
Thu Jan 22, 2015 1:47 pm

0 x

Re: Hercules DJControl AIR+ Script

Changes with v2.42:- Modifications related to n...
You do not have the required permissions to view the files attached to this post.


Return to “DeckaScripting”