Hercules DJControl AIR

Get support here - http://support.image-line.com/redirect/ ... Deckadance

Return to “DeckaScripting”

Forum rules
Deckadance is no longer an Image-Line product. For support please go here - http://support.image-line.com/redirect/ ... Deckadance
[You can only see part of this thread as you are not logged in to the forums]
DJ Phatso
Thu Sep 12, 2013 5:39 pm

x

Hercules DJControl AIR

DJ_Air_TopView_Small.png
First off, a big Thank you to Nucleon for breaking the ice with the DJControl AIR+ (and providing a good canvas to create more mappings :-)

Important: Before proceeding, be sure to disable Velocity for all PAD mode in the DJControl AIR control panel:



Decks:

Sync = Sync lock.
Cue = Stutter Cue point (Retrigger playback, hold and press play to continue).
Play = Play/Pause.

Jog wheels:

Vinyl Button = Activate scratch mode for Jog wheels.
Jog (Vinyl Button On) = Pitch bend (Turn only)/ Scratch playback (Push down and turn).
Jog (Vinyl Button Off) = Pitch bend .

Pitch:

Pitch Fader = Tempo.
Pitch + = Pitch bend nudge +
Pitch - = Pitch bend nudge -

Mixer:

Treble Knob = High EQ.
Middle Knob = Mid EQ.
Bass Knob = Bass EQ.

Browser:

FILES button On: Playlist navigation
Arrow UP= Playlist Up
Arrow DOWN= Playlist Down

FOLDER button On: Folder navigation
Arrow UP= Directory Up
Arrow Down= Directory Down.
LOAD A = Folder expand/collapse


Pads Mode selection section:
FX_select_Buttons.png
*UP Arrow= SHIFT A
*DOWN Arrow= SHIFT B


Pads Loop Mode:

Pad 1 = Loop on/off (when you end looping playback resumes from end of loop).
Pad 2 = Leap on/off (when you end looping playback resumes from where it would have been without looping).
Pad 3 = Half loop size.
Pad 4 = Double loop size.

<< button= Move loop left (when no loop or leap enabled moves playback position).
>> button= Move loop right (when no loop or leap enabled moves playback position).


Pads Effect Mode:

Button 1 = FX1 on/off
Button 2 = FX2 on/off
Button 3 = FX3 on/off
Button 4 = FX wet signal bass cut.

*Shift A + Treble Knob = FX 1 parameter.
*Shift A + Middle Knob = FX 2 parameter.
*Shift A + Bass Knob = FX 3 parameter.

*Shift B + Jog = Filter Deck A/B.

Pads Sample Mode:

Pad 1 = Set and trigger Hot Cue 1.
Pad 2 = Set and trigger Hot Cue 2.
Pad 3 = Set and trigger Hot Cue 3.
Pad 4 = Set and trigger Hot Cue 4.

*Shift B + Pad 1 = Delete Hot Cue 1.
*Shift B + Pad 2 = Delete Hot Cue 2.
*Shift B + Pad 3 = Delete Hot Cue 3.
*Shift B + Pad 4 = Delete Hot Cue 4.


Beats LEDs = Level Meter A/B .

Magic Button = Automix.
Rec Button = Disk recording.

Cue Button = Switch monitor cue level to max.
Mix Button = Switch monitor cue mix to 50%.

Proximity sensor = Not used

Other controls as labeled.
DD2_Hercules_DJC_AIR_V242.c
You do not have the required permissions to view the files attached to this post.
Last edited by DJ Phatso on Thu Jan 22, 2015 1:43 pm, edited 2 times in total.

Lejurai
Tue Aug 12, 2014 5:07 pm

x

Re: Hercules DJControl AIR

SupaHUGE thank you to you guys ^^ What does tha...

DJ Phatso
Wed Aug 13, 2014 3:29 pm

x

Re: Hercules DJControl AIR

It mean that the UP or DOWN arrow act as SHIFT ...

Lejurai
Wed Aug 13, 2014 6:03 pm

x

Re: Hercules DJControl AIR

Ah of course. Works like a charm Thank you.

DJ Phatso
Thu Jan 22, 2015 1:43 pm

x

Re: Hercules DJControl AIR

Changes with v2.42: - Modifications related to...


Return to “DeckaScripting”