Non-FL Hardware Question

for all your functional and musical questions

Return to “FL Studio (Looptalk, FL Studio users forum)”

[You can only see part of this thread as you are not logged in to the forums]
Wave~Play
Wed Apr 19, 2017 10:08 pm

0 x

Non-FL Hardware Question

Dunno where to put this, but my first inquire about my goal is here in the FL forums.

I have two KRK Rokit8's, a Seismic Audio Sub, which currently are being routed to my UMIX1008 Satellite usb interface. There are 4 total outputs, one from each KRK, two from the sub, all four are going into the line-out of the umix. I want to take those 4 outputs and merge them into two outputs, so that I have only two going into two line-outs of the umix. I tried that with the NADY AUDIO stereo mini mixer, but the result was "meh" (too quiet and distorted at high gain). I'm assuming this should be a simple task, yes? I just want to sum four mono's (two stereo's) to two mono's (one stereo). A possible solution I believe would be to use an amplifier after the mini mixer, but seems like a bad idea bec of I'd be boosting grainy signals. Perhaps I should use a better quality mini mixer? OR, this is not a good idea...what do yall think? Thanks,

Gear List:

Sub: https://www.amazon.com/Seismic-Audio-Spectra-12SUB-12-Inch-Subwoofer/dp/B00F5B2F9S/ref=sr_1_7?ie=UTF8&qid=1492639329&sr=8-7&keywords=seismic+audio+sub

KRK's: https://www.amazon.com/KRK-RP8-G3-Active-Reference-Monitors/dp/B01BZOW098/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1492639301&sr=1-1&keywords=KRK+rokit8

UMIX: https://www.amazon.com/Icon-Umix1008-Satelite-Interface-Cubase/dp/B00DGXYVC6

Nady Audio Mini Mixer: https://www.amazon.com/Nady-MM-242-Stereo-Channel-outputs/dp/B0009XH4HU/ref=sr_1_2?ie=UTF8&qid=1492639360&sr=8-2&keywords=nady+audio+mixer

FWIW, I use an older acer predator version: https://www.amazon.com/Acer-Predator-AG3-605-UR1G-Discontinued-Manufacturer/dp/B00R2N5OG8/ref=sr_1_10?s=pc&ie=UTF8&qid=1492639444&sr=1-10&keywords=acer+predator&refinements=p_n_feature_four_browse-bin%3A2289793011

(I also use Voice Meeter for internal monitoring / routing: http://vb-audio.pagesperso-orange.fr/Voicemeeter/ )

Spivkurl
Thu Apr 20, 2017 12:13 am

0 x

Re: Non-FL Hardware Question

Your post is a bit confusing, as you talk about...

Wave~Play
Thu Apr 20, 2017 12:31 am

0 x

Re: Non-FL Hardware Question

I'm sorry, I ramble...I think you got it when y...

Spivkurl
Thu Apr 20, 2017 11:18 am

0 x

Re: Non-FL Hardware Question

Your sub indeed has a line out, but the KRK see...

c5_convertible
Fri Apr 21, 2017 8:29 am

0 x

Re: Non-FL Hardware Question

Or you can use something like the Behringer DCX...

c5_convertible
Fri Apr 21, 2017 8:36 am

1 x

Re: Non-FL Hardware Question

I just reread Spivkurl's answer, and I think th...

Spivkurl
Fri Apr 21, 2017 11:14 am

0 x

Re: Non-FL Hardware Question

c5_convertible wrote:I just reread Spivkurl's a...

c5_convertible
Fri Apr 21, 2017 1:58 pm

1 x

Re: Non-FL Hardware Question

ok... I see what you mean with Line level. Line...

ReedIndeed
Fri Apr 21, 2017 5:03 pm

0 x

Re: Non-FL Hardware Question

Yeah, shouldn't it look like this.speakerdiagra...
You do not have the required permissions to view the files attached to this post.

Wave~Play
Fri Apr 21, 2017 5:05 pm

0 x

Re: Non-FL Hardware Question

Sorry for lack of replies, I've been away...rea...

Spivkurl
Fri Apr 21, 2017 5:40 pm

0 x

Re: Non-FL Hardware Question

c5_convertible wrote: There is no harm in tryin...

Wave~Play
Fri Apr 21, 2017 5:49 pm

0 x

Re: Non-FL Hardware Question

@ReedIndeed Attached is my current set up, and ...
You do not have the required permissions to view the files attached to this post.

c5_convertible
Fri Apr 21, 2017 6:04 pm

1 x

Re: Non-FL Hardware Question

To be honest, I have no idea what you are tryin...

ReedIndeed
Fri Apr 21, 2017 7:54 pm

0 x

Re: Non-FL Hardware Question

The idea with studio monitors is that you posit...

Spivkurl
Fri Apr 21, 2017 8:01 pm

0 x

Re: Non-FL Hardware Question

c5_convertible wrote:To be honest, I have no id...

Wave~Play
Sun Apr 23, 2017 11:10 pm

0 x

Re: Non-FL Hardware Question

Thanks everyone for the replies, its appreciate...

Spivkurl
Mon Apr 24, 2017 4:23 pm

1 x

Re: Non-FL Hardware Question

There are also some big disadvantages to adding...


Return to “FL Studio (Looptalk, FL Studio users forum)”