Synq DMC-2000

- Get support here - http://support.image-line.com/redirect/Gibson-Stanton-Deckadance
[You can only see part of this thread as you are not logged in to the forums]
L.S.D
Tue Apr 05, 2011 6:23 pm

1 x

Synq DMC-2000

Manufacturer: http://www.synq-audio.com
Product page: Click Here
Supported in Deckadance since: 1.90
Attachments
DMC-2000.jpg
DMC-2000.jpg (228.82 KiB) Viewed 11990 times

L.S.D
Tue Apr 05, 2011 10:29 pm

0 x

Configuration of the DMC-2000 hardware. Set the following paramaters in the DMC-2000 hardware setup (read the user's manual):

1. MIDI CH = 01-02-03
2. MIDI Setup TAP = HOLD
3. MIXER-mode = NO MIDI (Note: midi mixer supported since DD version 1.93)

L.S.D
Tue Apr 05, 2011 10:31 pm

0 x

Configuration of Deckadance audio and midi setup:
Attachments
DMC2000_Midi_Setup.jpg
DMC2000_Midi_Setup.jpg (105.97 KiB) Viewed 11987 times
DMC2000_Audio_Setup.jpg
DMC2000_Audio_Setup.jpg (125.64 KiB) Viewed 11987 times

L.S.D
Tue Apr 05, 2011 10:39 pm

2 x

Some tips of the native support:

1. Hold down the [X] or [Y] buttons in the DMC-2000 and move the [JOG] at the same time to control the FX parameters in Deckadance.
2. Hold down the [SHIFT] button and press the [LOAD] button in the DMC-2000 to load a file from the file browser into the decks of Deckadance.
3. Hold down the [SHIFT] button and press the [CUE] button in the DMC-2000 to rewind the song.
4. Hold down the [SHIFT] button and press the [PLAY] button in the DMC-2000 to start playing synchronized to the other deck.
5. Buttons [HOLD], [TIME], [SGL/CTN] and [DATABASE] are not implemented and can be used freely by the user for other functions.


Return to “Deckadance MIDI Controller Reference List”