FL Studio 10.5 (public Beta)

for all your functional and musical questions
[You can only see part of this thread as you are not logged in to the forums]
audiosabre
 
Apr 17, 2012 (22:32)
Haven't tried performance mode yet. Going to dust off my MPD32 later and have a go :P

The experience so far has been very, very good. FL feels really snappy and responsive. For the last couple of versions I've sometimes gotten visual latency, even when the CPU count isn't that high (28% for example). That seems to be cured with this beta; no slowing down of the graphics, or stuttering.

Also my MIDI controller (UF7) seems slightly more responsive than it was before. I don't know if that's related to the above or because of the MIDI handling changes.

Whatever it is, I like it. Many thanks. I'll definitely be using this beta as my main version. It's way more stable than 1.0.0.9...

nucleon
 
Apr 17, 2012 (22:36)
silikonanswer wrote:Is the Korg Nanopad2 suppor...
You do not have the required permissions to view the files attached to this post.

OneFish
 
Apr 18, 2012 (0:03)
Thank you Gol & Image Line for the update.

EmCDL
 
Apr 18, 2012 (0:06)
This would release right when I'm learning Able...

RajahP
 
Apr 18, 2012 (0:08)
Ok, how do you get those 'empty' pads (on the L...

EmCDL
 
Apr 18, 2012 (0:11)
Michael Lindenau wrote:TweakingKnobs wrote:Wher...

nucleon
 
Apr 18, 2012 (0:28)
RajahP wrote:Ok, how do you get those 'empty' p...

Itscmurph
 
Apr 18, 2012 (0:40)
EmCDL wrote:Michael Lindenau wrote:TweakingKnob...

audiosabre
 
Apr 18, 2012 (0:55)
I have a problem: the knobs and sliders on my U...

darkflow
 
Apr 18, 2012 (1:10)
nucleon, I understand TouchOSC choked up, and y...

L. Scott Knight
 
Apr 18, 2012 (1:41)
So I'm not sure I understand this right so I'll...

charlieb
 
Apr 18, 2012 (2:21)
Wow, would like to try, but 248 megs (on a slow...

darkflow
 
Apr 18, 2012 (3:30)
charlieb wrote:Wow, would like to try, but 248 ...
Last edited by darkflow on Wed Apr 18, 2012 4:42 am, edited 1 time in total.

Danziger
 
Apr 18, 2012 (4:20)
I've been playing with it for a little bit now,...

Scott
Site Admin
Apr 18, 2012 (4:54)
Michael Lindenau wrote:TweakingKnobs wrote:Wher...
What's this knob do? The F1 key is your friend!

Scott
Site Admin
Apr 18, 2012 (4:56)
L. Scott Knight wrote:So I'm not sure I underst...
What's this knob do? The F1 key is your friend!

L. Scott Knight
 
Apr 18, 2012 (5:49)
Scott,so would 10.1 be all the fixes and update...

Robert James
 
Apr 18, 2012 (6:45)
Sicky Popp wrote:OMG, brain freeze...i dont get...

jobro
 
Apr 18, 2012 (6:46)
Great news! I was starting to consider pay up s...

Mr. Soultronica
 
Apr 18, 2012 (7:13)
This is soooooooooooooooooo exciting! Can't wai...

Scott
Site Admin
Apr 18, 2012 (7:28)
L. Scott Knight wrote:Scott,so would 10.1 be al...
What's this knob do? The F1 key is your friend!

silikonanswer
 
Apr 18, 2012 (9:46)
nucleon many thanks for your answer

electroflux
 
Apr 18, 2012 (10:10)
I'm just waiting for a new desk so i can set my...

Nootch!
 
Apr 18, 2012 (11:10)
Hahahaha, last night I was trying to set up my ...

nucleon
 
Apr 18, 2012 (11:14)
jobro wrote:Say does 10.5 support Novation Noct...

nucleon
 
Apr 18, 2012 (11:20)
darkflow wrote:nucleon, I understand TouchOSC c...

fabb
 
Apr 18, 2012 (11:47)
Interesting stuff this performance mode. Too ba...

reflex
Site Admin
Apr 18, 2012 (11:52)
L. Scott Knight wrote:So I'm not sure I underst...

fabb
 
Apr 18, 2012 (11:53)
A question regarding the new Content Library: W...

reflex
Site Admin
Apr 18, 2012 (12:02)
fabb wrote:A question regarding the new Content...

Nootch!
 
Apr 18, 2012 (12:04)
nucleon wrote:XStone wrote:MPK25 and don't get ...

fabb
 
Apr 18, 2012 (12:08)
reflex wrote:fabb wrote:A question regarding th...

Bademantel
 
Apr 18, 2012 (12:16)
nucleon wrote:Say your on page 2, select a Harm...

nucleon
 
Apr 18, 2012 (12:20)
Nootch! wrote:nucleon wrote:XStone wrote:MPK25 ...

nucleon
 
Apr 18, 2012 (12:28)
Bademantel wrote:nucleon wrote:Say your on page...

Nootch!
 
Apr 18, 2012 (12:47)
nucleon wrote:Nootch! wrote:I set my MPK's pads...


jmc
Site Admin
Apr 18, 2012 (13:50)
Michael Lindenau wrote:TweakingKnobs wrote:Wher...

Bademantel
 
Apr 18, 2012 (14:26)
nucleon wrote:It wont light steps, but you coul...
You do not have the required permissions to view the files attached to this post.

ErotiCore SteNch
 
Apr 18, 2012 (14:49)
fabb wrote:Too bad you can't edit clips in the ...

Mattox
 
Apr 18, 2012 (15:34)
Can someone point me in the direction of gettin...

nucleon
 
Apr 18, 2012 (15:36)
Bademantel wrote:Is there a documentation of wh...

nucleon
 
Apr 18, 2012 (15:37)
Mattox wrote:Can someone point me in the direct...
You do not have the required permissions to view the files attached to this post.

jobro
 
Apr 18, 2012 (15:50)
So I heard in one of the videos that you can li...

Mattox
 
Apr 18, 2012 (15:51)
My setting are similar; but my padKontrols port...
You do not have the required permissions to view the files attached to this post.

nucleon
 
Apr 18, 2012 (15:54)
Use 'MIDIOUT2 (padKONTROL)' not 'padKONTROL' in...

nucleon
 
Apr 18, 2012 (15:57)
jobro wrote:So I heard in one of the videos tha...


jobro
 
Apr 18, 2012 (16:40)
Thanks. One objective with the highest priority...
You do not have the required permissions to view the files attached to this post.
Last edited by jobro on Wed Apr 18, 2012 6:23 pm, edited 1 time in total.

reflex
Site Admin
Apr 18, 2012 (16:45)
fabb wrote:Thank you! I thought the options fro...

nucleon
 
Apr 18, 2012 (17:17)
jobro wrote:Create a few patterns 1 bar long, n...

ErotiCore SteNch
 
Apr 18, 2012 (17:24)
nucleon wrote:jobro wrote:Say does 10.5 support...

nucleon
 
Apr 18, 2012 (17:52)
It will work as a normal controller, but withou...

ErotiCore SteNch
 
Apr 18, 2012 (18:13)
nucleon wrote:It will work as a normal controll...

nucleon
 
Apr 18, 2012 (18:24)
No worries.Grouped clips take up the same numbe...

ErotiCore SteNch
 
Apr 18, 2012 (18:34)
nucleon wrote:No worries.Grouped clips take up ...

fabb
 
Apr 18, 2012 (20:43)
reflex wrote:What exactly do you do, step by st...

nucleon
 
Apr 18, 2012 (21:54)
ErotiCore SteNch wrote:ive figured that all fx ...

XStone
 
Apr 18, 2012 (22:05)
nucleon wrote:You need to set its pads to outpu...

ErotiCore SteNch
 
Apr 18, 2012 (22:52)
nucleon wrote:ErotiCore SteNch wrote:ive figure...

Matthieu
 
Apr 18, 2012 (23:00)
OMG i'd "kick your mom" to own a jazz...

nucleon
 
Apr 18, 2012 (23:15)
ErotiCore SteNch wrote:thanks will look into th...

gol
 
Apr 19, 2012 (0:50)
The padKontrol is still says: 5.01padKontrol's ...

VibraSound
 
Apr 19, 2012 (9:11)
What is the exact file size of FL Studio 10.5 ?...
Last edited by VibraSound on Thu Apr 19, 2012 9:21 am, edited 1 time in total.

ErotiCore SteNch
 
Apr 19, 2012 (9:15)
nucleon wrote:ErotiCore SteNch wrote:thanks wil...

reflex
Site Admin
Apr 19, 2012 (11:06)
(( RadioMAX.ca )) wrote:What is the exact file ...

artificial
 
Apr 19, 2012 (11:21)
Thank you so much for the extended midi control...

Scott
Site Admin
Apr 19, 2012 (12:14)
artificial wrote:Thank you so much for the exte...
What's this knob do? The F1 key is your friend!

artificial
 
Apr 19, 2012 (14:47)
Scott wrote:artificial wrote:Thank you so much ...

Fontlove
 
Apr 19, 2012 (15:03)
Any news on the MAC BETA TEST, GOL?

nucleon
 
Apr 19, 2012 (15:46)
artificial wrote:thanks but unfortunately I'm n...

nucleon
 
Apr 19, 2012 (15:50)
jobro wrote:One objective with the highest prio...
You do not have the required permissions to view the files attached to this post.

ErotiCore SteNch
 
Apr 19, 2012 (16:25)
nucleon wrote:Try Ctrl+Insert to add space. Als...

nucleon
 
Apr 19, 2012 (16:33)
ErotiCore SteNch wrote:nucleon wrote:Try Ctrl+I...

ErotiCore SteNch
 
Apr 19, 2012 (17:00)
how do i embed a video file,showing what i mean...

nucleon
 
Apr 19, 2012 (17:01)
Try Jing, record part of the screen, save the f...

ErotiCore SteNch
 
Apr 19, 2012 (17:19)
ok made a small screencasthttp://screencast.com...

Bademantel
 
Apr 19, 2012 (17:19)
Is there an option for automatic fitting a clip...

Bademantel
 
Apr 19, 2012 (17:22)
ErotiCore SteNch wrote:ok made a small screenca...

ErotiCore SteNch
 
Apr 19, 2012 (17:22)
nucleon wrote:I guess it could be changed so mo...

nucleon
 
Apr 19, 2012 (18:27)
Why not just rename the markers? Unless you mea...

nucleon
 
Apr 19, 2012 (18:29)
Bademantel wrote:And how come a new clip is mut...

ErotiCore SteNch
 
Apr 19, 2012 (18:53)
nucleon wrote:Why not just rename the markers? ...

Bademantel
 
Apr 19, 2012 (18:53)
Yes, my bad. It makes sense to not have dragged...

Sicky Popp
 
Apr 19, 2012 (18:54)
is there an exlanation for all the pages on the...

Bademantel
 
Apr 19, 2012 (18:59)
Sicky Popp wrote:is there an exlanation for all...


Bademantel
 
Apr 19, 2012 (19:08)
look under fls 10.5beta/system/hardwarespecific

Sicky Popp
 
Apr 19, 2012 (19:10)
yeha, i found these, but they are not to open ...

Bademantel
 
Apr 19, 2012 (19:16)
open them with a notepad or texteditor. file1 i...

nucleon
 
Apr 19, 2012 (19:16)
its not the names of the markers,look in the vi...
You do not have the required permissions to view the files attached to this post.

ErotiCore SteNch
 
Apr 19, 2012 (19:19)
ahh ok thanksit would be more convinient though...

Sicky Popp
 
Apr 19, 2012 (19:29)
Bademantel wrote:open them with a notepad or te...

Sicky Popp
 
Apr 19, 2012 (19:30)
Bademantel wrote:open them with a notepad or te...

Sicky Popp
 
Apr 19, 2012 (19:30)
Bademantel wrote:open them with a notepad or te...

Bademantel
 
Apr 19, 2012 (19:35)
so open the file from within the notepad or com...

Sicky Popp
 
Apr 19, 2012 (19:43)
okay, got it but its kinda to cryptic for me, m...

T_CM11_5
 
Apr 19, 2012 (19:45)
THE KORG MS20 USB PATCH CABLES WORK NOW!!!(sorr...

T_CM11_5
 
Apr 19, 2012 (20:01)
And no more manually assigning the knobs!!Only ...

electroflux
 
Apr 19, 2012 (21:03)
Sicky Popp wrote:okay, got it but its kinda to ...

PreviousNext

Click here for (Advanced Forum Search)