Native Instruments Kore 2
Return to “FL Studio Users Forum (Looptalk)”
Forum rules
Please read them here.
Please read them here.
[You can only see part of this thread as you are not logged in to the forums]
Native Instruments Kore 2
In FL, set the Input and Output ports of the NI Kore 2 to 160, and select Mackie Control Universal for controller type.
Note: you can add pages to the template to send midi CC. All the default pages send MCU controls, not midi.
In the default Mackie kore template, Enter and Esc are Rewind and FFW. I found that in order to make the best arrangement of pages I needed to replace Rewind with Shift. Esc is rewind. You can still fast-forward by using touch controls on the knobs in the Edison and Navigation pages. Good times.
Bank L and Bank R are always Control and Sound.
FL Studio Page
From here you can control the Master Fader, open an instance of Edison, enable Metronome and Countdown, switch between Pattern or Song mode, select Time Display and Insert. Press Snap to turn snap on/off, hold to change snap settings with the jog wheel. Hold Zoom to zoom in or out with the jog wheel.
File Page
Save Project, Right-click menu, ESC and Enter are also Yes and No when pressing Shift, add marker at current play position, open the browser, open the channel rack, and hold Nudge to move selection left or right with the jog wheel.
Edit Page
Standard edition commands are in here. To select, move to desired position, press From, use jog wheel to make selection, then press Select. Menu will open the menu of whatever you have focused, then you use the jog wheel to select.
Edison - Hold Shift Page
This page is mostly a copy of the Edit page but labeled for use with Edison. Hold shift to use the buttons as described; not for the knobs.
Navigation Page
Here you can move the current track left or right, use the arrows to scroll around, hold Mark to move to the next or previous marker with the jog wheel, hold Wdw to cycle focus between currently visible windows with the jog wheel.
Selection Page
All buttons in this page are meant to be held and used with the jog wheel. Use to select pattern, mixer channel, rack channel, and change the tempo. You can also freely assign 4 controls to the jog wheel.
Mixer Page
This is where you select what the Vpots control between pan (Mixer), stereo width, sends (you can find any send with the bank controls), FX levels, the mixer EQ, and a freely assignable page. Flip makes the Vpots control the volume faders instead. Smooth enables smoothing in the FL remote control.
The remaining pages are the same that come with the default Mackie Kore template. They are used for standard control of the mixer.
Note: you only get visual feedback for the volume faders, the master fader and the scrub, play/stop buttons. The Vpots and buttons have no visual feedback.
You do not have the required permissions to view the files attached to this post.
Re: Native Instruments Kore 2
So, Recently I've been on a "buy up every usele...
-
- Technical Support
- Thu May 06, 2021 8:53 am
Re: Native Instruments Kore 2
It is a LONG time ago that I saw one of these.....