(Skip to the bottom for the question)
I was mixing my project and had to use Gross Beat in the master for one part of the song, But what I found was it was clipping over 0db, which was strange since i had soft clip on the master, So I decided to use the "Current" channel in the mixing board (Which is the metering channel with no volume slider) and put a second soft clip on that, And my issue was solved!
Q: So is this meant to be a little Easter egg? or a functioning secondary master channel.. Or maybe this is the true master channel..? All help is appreciated
Understanding the Mixing board
Return to “FL Studio Users Forum (Looptalk)”
Forum rules
Please read them here.
Please read them here.
[You can only see part of this thread as you are not logged in to the forums]
Re: Understanding the Mixing board
Seems to be some kind of "test" track, as best ...
You do not have the required permissions to view the files attached to this post.
Re: Understanding the Mixing board
RedSprite wrote: ↑Wed Sep 22, 2021 7:54 pm
(Ski...
Re: Understanding the Mixing board
Also, Soft Clipper can go above 0db with the Po...
Re: Understanding the Mixing board
RedSprite wrote: ↑Wed Sep 22, 2021 7:54 pm
(Ski...