AKAI MPC

MIDI Controllers FL Studio officially supports

Return to “MIDI Controller Reference List”

[You can only see part of this thread as you are not logged in to the forums]
Scott
Site Admin
Thu Jun 11, 2009 6:46 am

x

AKAI MPC

The following page discusses slaving all MPC models to FL Studio.
mpc_FL Studio.png
http://www.akaipro.com/syncfruity

Note: FL Studio outputs Sync. It does not receive Sync.

Connect a MIDI cable from an available MIDI OUT of your MIDI interface to an available MIDI IN on your MPC.

Using MIDI Time Code (MTC) & MIDI Machine Control (MMC):

On MPC5000 / 2500:

1. Go to the MIDI/Sync menu.
2. Set "Sync In" to the corresponding MIDI input port on the MPC.
3. Set "Mode" to "MIDI Time Code."
4. Set the Tempo of the MPC sequence to match that of your FL Studio session.

In FL Studio:

1. Go to the Options Menu > MIDI Settings or press F10 on your keyboard.
2. Under the Output section, choose the device port of your MIDI interface to which you have connected the MIDI cable to the MIDI IN on your MPC.
3. Enable "Send Master Sync."
4. Select the Synchronization Type "MTC 30 fps."
5. Close the Preferences window.
6. Press Play. Your MPC will now play in-sync with FL Studio.

Using MIDI Beat Clock & MIDI Machine Control (MMC):

On MPC5000 / 2500:

1. Go to the MIDI/Sync menu.
2. Set "Sync In" to the corresponding MIDI input port on the MPC.
3. Set "Mode" to "MIDI Clock."
4. Set "Receive MMC" to "ON."

On the MPC500:

1. Go to the MIDI/Sync menu.
2. Press Mode + PAD 7.
3. Turn the data wheel to display "Sync."
4. Press the DOWN cursor.
5. Use the data wheel to change the sync mode to "Slave."

On the MPC1000:

1. Go to the MIDI/Sync Menu:
2. Press Mode + PAD 9.
3. Sync [F2].
4. Sync In: 1 or 2 (whichever MIDI input you plugged your MIDI cable into).
5. Sync Out: Off.

In FL Studio:

1. Go to the Options Menu > MIDI Settings or press F10 on your keyboard.
2. Under the Output section, choose the device port of your MIDI interface to which you have connected the MIDI cable to the MIDI IN on your MPC.
3. Enable "Send Master Sync."
4. Select the Synchronization Type "MIDI Clock."
5. Close the Preferences window.
6. Press Play. Your MPC will now play in-sync with FL Studio.

All trademarks and registered trademarks are the property of their respective owners.
You do not have the required permissions to view the files attached to this post.

jprov
Wed Apr 07, 2021 2:26 am

x

Re: AKAI MPC

Can I get this but for the MPK mini and 225?

natraj
Tue Apr 13, 2021 9:10 pm

x

Re: AKAI MPC

The MPCs are instruments. The MPK mini and 225 are MIDI controllers. Totally different things.

If you want your controllers to behave in a certain way, look into MIDI scripting. There is the manual and a subforum.

David innes
Mon May 03, 2021 8:40 pm

x

Re: AKAI MPC

i have a M - audio keystation 88 11 but i cant see any list for the drivers or driver

David innes
Mon May 03, 2021 8:42 pm

x

Re: AKAI MPC

also i cant save on save or save as

NTO
Tue May 04, 2021 11:31 am

x

Re: AKAI MPC

David innes wrote:
Mon May 03, 2021 8:40 pm
i have a M - audio keystation 88 11 but i cant see any list for the drivers or driver
FWIW - you should have posted these in the controller support forum.
viewforum.php?f=1915

Keystation 88 is USB-powered, class-compliant, and supports USB-MIDI connectivity. There are no driver(s) required for the limited functionality.


Return to “MIDI Controller Reference List”