Hello,
First off, i'm new to the forums. So excuse me if I post anything in the wrong section or whatever
Anyway. I recently got my Arturia Minilab MIDI Controller. I got it all set up and FL recognized the controller. Problem is, when I try to link a hardware knob to an FL knob, the FL knob switches back to 50% of the knob.
Example: I link hardware knob 1 to parameter A in FL. The link works. But, when I twist knob 1 any direction, parameter A will only twist slightly to the left or right (depending on my own movement) and reverts automatically.
At first I thought this could be because of the knobs on my controller. These can be twisted infinitely. But when I try to link parameter A to an equalizer knob from my DDJ-ERGO, (which cannnot twist all the way around) the parameter A works perfect, without reverting to the 50% of the value.
I hope I have made my problem clear enough to understand, And that I used the correct terms
Thanks in advance!
Arturia Minilab Knob Problem
Return to “MIDI Controller Support”
[You can only see part of this thread as you are not logged in to the forums]
Re: Arturia Minilab Knob Problem
Shift and number 1 pad (or 3,4,5,6,7,8) when us...
Re: Arturia Minilab Knob Problem
Thanks a lot Dave!! It worked when I did Shift ...
Re: Arturia Minilab Knob Problem
I am grateful for this question and answer. Th...
Re: Arturia Minilab Knob Problem
4 years later and this thread still came in han...
Re: Arturia Minilab Knob Problem
What do you mean by pad 1 through 8? Do you mea...
Re: Arturia Minilab Knob Problem
Shift on Minilab.
Pad{1-8}
Mine was pad 3. No...
Re: Arturia Minilab Knob Problem
im getting really frustrated.... when using the...
Re: Arturia Minilab Knob Problem
To get Analog Lab to work with the knobs like i...
You do not have the required permissions to view the files attached to this post.
Re: Arturia Minilab Knob Problem
I tried to set my Pad # notes to all C5, they a...
Re: Arturia Minilab Knob Problem
what about the pads? when I press any of the pa...
Re: Arturia Minilab Knob Problem
Philth wrote:To get Analog Lab to work with the...
Re: Arturia Minilab Knob Problem
That error means that on the left, you don't ha...
Re: Arturia Minilab Knob Problem
Philth wrote: ↑Tue Mar 26, 2019 3:51 am
To get ...
Re: Arturia Minilab Knob Problem
OwlyPants wrote: ↑Fri Nov 01, 2019 10:22 pm
Phi...
Re: Arturia Minilab Knob Problem
Philth wrote: ↑Tue Mar 26, 2019 3:51 am
To get ...
Re: Arturia Minilab Knob Problem
If you select "Input port" 1 because your MIDI ...