Hi. I have a performance project I am working on. I am using 3 MIDI Controllers: Two Launchpad MK2's, Launchpad S, and a Akai MPK 249. I have two USB 3.0 ports, and 1 USB 2.0 port.
The USB 2.0 Port is getting the Akai MPK 249 directly.
One USB 3.0 is getting a Focusrtie Scarlett 2i2 directly.
One USB 3.0 is getting a USB 3.0 Hub with 4 slots (no external power) with the 3 Launchpads plugged into it.
I was having trouble getting both Launchpad MK2's to work seperately so I set one Launchpad MK2 from port 215 to port 216 in the MIDI in and out, and it worked for a while, but now it isn't functioning normally like the other Launchpad MK2. The Launchpad on port 216 Am I doing something improper with the setup of the 2nd Launchpad MK2? I want to use it like a second independent launchpad.
Hope this makes sense. Will reply with further details if needed
Trouble using 2 Launchpad MK2's
Return to “MIDI Controller Support”
[You can only see part of this thread as you are not logged in to the forums]
Re: Trouble using 2 Launchpad MK2's
For the first Launchpad MK2 use 215 for its inp...
Re: Trouble using 2 Launchpad MK2's
That is how I was using the 2 Launchpad MK2's, ...
Re: Trouble using 2 Launchpad MK2's
I have only just seen that the USB hub you are ...
Re: Trouble using 2 Launchpad MK2's
Possibly, but when I tried plugging the launchp...
Re: Trouble using 2 Launchpad MK2's
Try updating the firmware on both devices if yo...
Re: Trouble using 2 Launchpad MK2's
I double checked to see if the firmware was upd...
Re: Trouble using 2 Launchpad MK2's
all
planning to buy one. Are there still issue...
Re: Trouble using 2 Launchpad MK2's
I have 1 launchpad mk2 now that I use with a La...