Harmor VSTi 1.3.50.86-RC testing reports

Here you can find (time limited) beta's for plugins & program components

Return to “Public Betas - Plugins & Components”

[You can only see part of this thread as you are not logged in to the forums]
N_K
Sat Jan 02, 2021 3:30 am

x

Harmor VSTi 1.3.50.86-RC testing reports

Host used: REAPER 6.18
Plugin version: Harmor VSTi 1.3.50.86-RC 64-bit


Confirming as fixed since last official version (1.3.39):

- recall of "smooth mod" parameter appears to work properly now - THANKS! (in 1.3.39, it was forced to "on" state on project load while GUI indicator remained off)

- vel to vol button appears to work (and indicate its state in GUI) properly now - THANKS!


Related to MPE / multichannel MIDI:

- MIDI pitchbend remains "unofficially MPE compatible", as it responds per MIDI channel. This is very good, thanks!

- parameters which have VST GUI equivalents (such as FREQ) do not appear to respond per-MIDI-channel to learned MIDI CCs. This is probably a technical limitation, but if it's not - of course, it'd be great if at least some of them were "MPE-compatible" like pitchbend.


***

EDIT: the below described stuck notes problem is due to REAPER sending more Note Ons than Note Offs in some situations. Harmor 1.3.21 could handle that, but 1.3.39 and 1.3.50.86 cannot. This can be mitigated by inserting REAPER's "JS: MIDI note sanitizer" plugin before Harmor VSTi in the signal chain.

Problems still observed

- sometimes specific MIDI notes [when used in REAPER] get stuck on. If Harmor is then sent All Notes Off, the sound stops - but as soon as same note is sent again, it gets stuck again.

In other words, it's almost as if either Harmor - or REAPER's equivalent of VST wrapper - "starts to refuse" to receive note offs for certain MIDI note numbers, and only obeys All Note Offs.

This also happens with version 1.3.39. Reproducing it is unpredictable, as far as I've tried. Editing MIDI while playing back [the MIDI item] for a while seems to trigger it. Reloading the REAPER project resets it, but stuck notes may appear again.

Significant part of the problem is probably in REAPER, because similar issues have been reported on REAPER forums with other VSTis as well. However, there are also plenty of VSTis which do not have this problem.

I have not encountered notes sticking like that with Harmor VSTi 1.3.21 in REAPER, despite using it regularly.
So if you'll be checking this, the differences in code [between 1.3.21 and 1.3.50.86] for handling MIDI input are probably of interest.
Last edited by N_K on Sun Jan 24, 2021 11:19 am, edited 1 time in total.

N_K
Fri Jan 08, 2021 7:04 am

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

Regarding stuck MIDI notes in REAPER: attached ...
You do not have the required permissions to view the files attached to this post.

N_K
Mon Jan 18, 2021 10:33 am

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

A question I've been recently wondering about: ...


wookiejedimaster
Sun Jan 24, 2021 11:23 pm

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

!!!
You do not have the required permissions to view the files attached to this post.

miro (staff)
Site Admin
Wed Jan 27, 2021 12:10 pm

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

mac or win? which version of Bitwig do you use?...
You do not have the required permissions to view the files attached to this post.



wookiejedimaster
Tue Feb 23, 2021 10:17 pm

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

Just in case you want to reproduce and or fix t...
You do not have the required permissions to view the files attached to this post.

N_K
Thu May 20, 2021 9:10 pm

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

I've been further testing the "stuck notes" pro...
You do not have the required permissions to view the files attached to this post.


N_K
Mon Aug 23, 2021 12:59 am

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

In Harmor VSTi 1.3.50.86 RC there appears to be...
You do not have the required permissions to view the files attached to this post.

N_K
Sat Oct 16, 2021 3:55 pm

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

A little bump, new info added in previous messa...

DvPerep
Mon Jan 10, 2022 5:44 am

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

Maybe this is a dumb question and it may have b...

N_K
Mon Jan 10, 2022 9:33 am

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

DvPerep wrote: ↑Mon Jan 10, 2022 5:44 am Maybe ...

DvPerep
Thu Jan 13, 2022 5:46 am

x

Re: Harmor VSTi 1.3.50.86-RC testing reports

Usually that can be done by selecting "Reset" i...


Return to “Public Betas - Plugins & Components”