Phone calibration for Audiotechnica ATH m50

The place to share your Impulse Responses

Return to “Fruity Convolver”

[You can only see part of this thread as you are not logged in to the forums]
Ricciardo
Fri Apr 17, 2015 4:11 pm

3 x

Phone calibration for Audiotechnica ATH m50

what i am sharing here may help you to see how your mix translate in the real world when mixing with this headphone model...

basicly this curves are a compensation for the frequency response of the ATH m50.

by using this on a master channel when mixing, you will have a point of reference about how your mix may sound like in a completly fat (impossible in teory) perspective...
but while not being 100% accurate this can help you to increase your mix balance/translation

NOTE: this is supposed to be used for listening only, never ever let this turned on in your master channel when rendering... do not ever use this when listening without the m50's...
switch it off when using monitors... (dont forget)

This only works for audiotechnica ATH m50's
You do not have the required permissions to view the files attached to this post.



Return to “Fruity Convolver”