Expanding on the 'One-button A/B comparison' preset for Patcher (viewtopic.php?f=1952&t=171768), this tool is a Dry/Wet fader with an On/Off switch for the effect plugin.
Operation:
1.) Load the attached preset as a Patcher Effect into a Mixer Insert
2.) Within the preset, replace the default effect (Fruity Waveshaper) by a desired effect (or a respective chain of effects)
3.) Feed audio into said Mixer Insert
4.) Open the preset's 'Surface' (Tab: Knob and Fader) and activate the effect using the button (yellow = off, blue = on)
5.) Slowly move the D/W fader from 'Dry' toward the 'Wet' position and monitor the increasing intensity of the effect. Left = 100% dry, right = 100% wet
6.) Adjust volume of dry and wet paths using the volume knobs on the 'Knob and Fader' tab as needed to achieve equivalent gains. Use meter to monitor
7.) Optional: Link inputs to the 'Knob and Fader' tab to a hardware MIDI controller
To maintain linearity, D/W crossfading is accomplished using Fruity Love Philter, as outlined in the discussion at viewtopic.php?f=100&t=240823.
The provided preset carries the effect plugin on the inside. However, with slight modifications, the preset can also be loaded (nested) into an already existing Patcher preset and placed behind the effect to be controlled. The effect is then located outside of (i.e. before) the inner instance of Patcher. Required modification include deletion of the effect plugin on the inside and addition of connectors (one yellow dot each in 'From FL Studio' and on the outside of the nested Patcher, respectively) to be able to route two audio signals (dry and wet) into the nested Patcher (see pics).
Dry/Wet Fader with On/Off Switch
[You can only see part of this thread as you are not logged in to the forums]
Re: Dry/Wet Fader with On/Off Switch
Christ, that is over complex?
Do I really have...
Re: Dry/Wet Fader with On/Off Switch
NotIdentity25 wrote: ↑Wed Nov 30, 2022 9:16 pm
...