Velocity Sensitive Step Gated and note triggered Reverb
Posted: Thu Oct 03, 2019 6:39 am
load this effect on the mixer where needed
Use a midi out port 42 channel 9 to control the reverb
the input main dry signal passes through (allowing to use it on 1 mixer track without needing a send bus, but can be used on a bus also)
note velocity controls reverb input intensity,
note start triggers the reverb on.. and note end triggers the reverb tail length via gating it.
note key doesn't matter with it as long as it's port 42 and channel 9
it could be modified to use one key to trigger the reverb, allowing to use it on a split keyboard playing a main instrument
for those using fl studio 20.5 can download the version in the following post - or just answer yes to the 'load it anyway' error dialog it works fine in 12.5 also but was made in the 20.6 beta.
hope someone finds it helpful - enjoy
Use a midi out port 42 channel 9 to control the reverb
the input main dry signal passes through (allowing to use it on 1 mixer track without needing a send bus, but can be used on a bus also)
note velocity controls reverb input intensity,
note start triggers the reverb on.. and note end triggers the reverb tail length via gating it.
note key doesn't matter with it as long as it's port 42 and channel 9
- step-gated-reverb-trigger-piano-roll.jpg (73.22 KiB) Viewed 6425 times
- change-impulse.jpg (77.38 KiB) Viewed 6425 times
- note-triggered-reverb.jpg (23.82 KiB) Viewed 6425 times
hope someone finds it helpful - enjoy