All output parameter nodes can be connected to the same parameter in the instrument.
You can use the sliders to set a value and then press a or b button to select a set slider. Adjusting the slider will bring it to that value as so as you adjust or just press the button for that set value.(kinda like a rotary encoder knob on the AKAI fire resumes to that value)
You can adjust using just the digits.
Hope this helps
See if this patcher switch will work in your projects
[You can only see part of this thread as you are not logged in to the forums]
See if this patcher switch will work in your projects
- Attachments
-
- onoffswitch.fst
- (17.86 KiB) Downloaded 53 times