I've recreated this "problem" multiple times when working with identical images on the A and B side.
-First I set Harmor to Song synced resynthesis (template preset).
-Next I copy the Image time offset > LFO state using the Copy to part a/b button.
-I drop two samples in that are edited according to the correct length.
-Next I reset FL studio because if I don't do that, the two sides will be out of sync.
-I Re-open the project, and bang, I have the image on Part A and Part B playing exactly the same thing.
Ok, so the actual problem is, once Harmor is set up in this way, If i go to either Part A or B and click side on the advanced tab, it just kills the sound. For example, if I have side engaged on Part A and B at the same time, there's no sound at all.
The manual says:
side - Used when importing stereo samples. Use the 'Templates > Resynthesis' patch then drop or import a STEREO sample on Part A then again on Part B. Part B has the switch engaged and the sample is now used in MID/SIDE stereo mode. Part A contains MID and part B SIDE information. When remixed during playback the original stereo sound is heard. Use the Part A/B slider can be used to change the stereo separation. 0% = Mid sound [mono]. 50% = original stereo sound. 75% = maximum stereo separation. 100% = Side sound [mono].
Does it really need to be set to Resynthesis. It can't be set to Song synced resynthesis?
The place to upload Harmor presets and discuss programming.
4 posts • Page 1 of 1
[You can only see part of this thread as you are not logged in to the forums]