Hercules DJControl AIR
Forum rules
Deckadance is no longer an Image-Line product. For support please go here - http://support.image-line.com/redirect/ ... Deckadance
Deckadance is no longer an Image-Line product. For support please go here - http://support.image-line.com/redirect/ ... Deckadance
[You can only see part of this thread as you are not logged in to the forums]
Hercules DJControl AIR
Important: Before proceeding, be sure to disable Velocity for all PAD mode in the DJControl AIR control panel:
Decks:
Sync = Sync lock.
Cue = Stutter Cue point (Retrigger playback, hold and press play to continue).
Play = Play/Pause.
Jog wheels:
Vinyl Button = Activate scratch mode for Jog wheels.
Jog (Vinyl Button On) = Pitch bend (Turn only)/ Scratch playback (Push down and turn).
Jog (Vinyl Button Off) = Pitch bend .
Pitch:
Pitch Fader = Tempo.
Pitch + = Pitch bend nudge +
Pitch - = Pitch bend nudge -
Mixer:
Treble Knob = High EQ.
Middle Knob = Mid EQ.
Bass Knob = Bass EQ.
Browser:
FILES button On: Playlist navigation
Arrow UP= Playlist Up
Arrow DOWN= Playlist Down
FOLDER button On: Folder navigation
Arrow UP= Directory Up
Arrow Down= Directory Down.
LOAD A = Folder expand/collapse
Pads Mode selection section:
*UP Arrow= SHIFT A
*DOWN Arrow= SHIFT B
Pads Loop Mode:
Pad 1 = Loop on/off (when you end looping playback resumes from end of loop).
Pad 2 = Leap on/off (when you end looping playback resumes from where it would have been without looping).
Pad 3 = Half loop size.
Pad 4 = Double loop size.
<< button= Move loop left (when no loop or leap enabled moves playback position).
>> button= Move loop right (when no loop or leap enabled moves playback position).
Pads Effect Mode:
Button 1 = FX1 on/off
Button 2 = FX2 on/off
Button 3 = FX3 on/off
Button 4 = FX wet signal bass cut.
*Shift A + Treble Knob = FX 1 parameter.
*Shift A + Middle Knob = FX 2 parameter.
*Shift A + Bass Knob = FX 3 parameter.
*Shift B + Jog = Filter Deck A/B.
Pads Sample Mode:
Pad 1 = Set and trigger Hot Cue 1.
Pad 2 = Set and trigger Hot Cue 2.
Pad 3 = Set and trigger Hot Cue 3.
Pad 4 = Set and trigger Hot Cue 4.
*Shift B + Pad 1 = Delete Hot Cue 1.
*Shift B + Pad 2 = Delete Hot Cue 2.
*Shift B + Pad 3 = Delete Hot Cue 3.
*Shift B + Pad 4 = Delete Hot Cue 4.
Beats LEDs = Level Meter A/B .
Magic Button = Automix.
Rec Button = Disk recording.
Cue Button = Switch monitor cue level to max.
Mix Button = Switch monitor cue mix to 50%.
Proximity sensor = Not used
Other controls as labeled.
You do not have the required permissions to view the files attached to this post.
Last edited by DJ Phatso on Thu Jan 22, 2015 1:43 pm, edited 2 times in total.
Re: Hercules DJControl AIR
SupaHUGE thank you to you guys ^^ What does tha...
Re: Hercules DJControl AIR
It mean that the UP or DOWN arrow act as SHIFT ...
Re: Hercules DJControl AIR
Ah of course. Works like a charm Thank you.
Re: Hercules DJControl AIR
Changes with v2.42:
- Modifications related to...