Hercules DJ Console 4-Mx (2 / 4 Decks)

Get support here - http://support.image-line.com/redirect/ ... Deckadance

Return to “DeckaScripting”

Forum rules
Deckadance is no longer an Image-Line product. For support please go here - http://support.image-line.com/redirect/ ... Deckadance
[You can only see part of this thread as you are not logged in to the forums]
DJ Phatso
Thu Sep 26, 2013 6:54 pm

x

Hercules DJ Console 4-Mx (2 / 4 Decks)

DJ_Console_4_Mx_Top_lowRez(Small).jpg
Important:
Before proceeding, in the DJ 4-Mx Control panel, be sure to set Deck Mode accordring to the configuration you wish to use:

- 2 Decks (basic) .
- 4 Decks (Default) .
4Mx_CPL_setup_PC.png

Decks:

Sync = Sync lock.
Cue = Stutter Cue point (Retrigger playback, hold and press play to continue).
Play = Play/Pause.
Stop = Keylock

Jog wheels:

SCRATCH Button = Activate scratch mode for Jog wheels.
Jog (Vinyl Button On) = Pitch bend (Turn only)/ Scratch playback (Push down and turn).
Jog (Vinyl Button Off) = Pitch bend .

Pitch:

Pitch Fader = Tempo.
Pitch + = Pitch bend nudge +
Pitch - = Pitch bend nudge -

Gain Knobs:

Source Button on = Filter.
Source Button off = Gain.

Mixer:

Treble Knob = High EQ.
Middle Knob = Mid EQ.
Bass Knob = Bass EQ.
Kill = EQ kill High/Mid/Bass

Browser:

FILES button On: Playlist navigation
Arrow UP= Playlist Up
Arrow DOWN= Playlist Down

FOLDER button On: Folder navigation
Arrow UP= Directory Up
Arrow Down= Directory Down.
LOAD A = Folder expand/collapse

Loops

Pitch Scale - + Pitch Scale + = Loop on/off (when you end looping playback resumes from end of loop).
Pitch Scale - = Half loop size.
Pitch Scale + = Double loop size.

<< button= Move loop left (when no loop or leap enabled moves playback position).
>> button= Move loop right (when no loop or leap enabled moves playback position).

Hotcue

Button 1 to 4 = Hot Cue 1 to 4.

Samples

Button 5 & 6 = Sample pad 1&2 (Deck A), Sample pad 3&4 (Deck B) .


Effects

Button 7 = FX1 on/off
Button 8 = FX2 on/off
Button 9 = FX3 on/off
Button 10 = FX wet signal bass cut.

Button 7 + Ctrl encoder = FX 1 parameter.
Button 8 + Ctrl encoder = FX 2 parameter.
Button 9 + Ctrl encoder = FX 3 parameter.
Button 10 + Ctrl encoder= Dry/Wet FX

Grossbeat

Button 11 = Grossbeat A/B 1
Button 12 = Grossbeat A/B 2

AUTO = Enable/disable Snap & Quantize


Other controls as labeled.
DD2_Hercules_DJC_4Mx(4Decks)_V242.c
You do not have the required permissions to view the files attached to this post.
Last edited by DJ Phatso on Thu Jan 22, 2015 1:37 pm, edited 1 time in total.

DJ Phatso
Thu Jan 22, 2015 1:14 pm

x

Re: Hercules DJ Console 4-Mx (2 / 4 Decks)

Changes with v2.42: - Modifications related to...


Return to “DeckaScripting”