Hi devs,
A quick suggestion: have you considered making the channel EQ activate and deactivate with the same FX switch that turns inserts on and off, which is located below the channel faders?
Or, as an alternative since the channel EQ is not an insert, it would be handy to have an on-off switch for it near the EQ controls.
Scenario when this is useful: you bounce the master channel that had the channel EQ applying equalization to it. You load the bounced track back and route it to the same master channel. You disable all FX with the switch, but you have to set the channel EQ controls to zero, which is an operation that requires 3 undo/redo's to jump between configurations. Or more, if you moved other controls while listening.
Cheers
Channel EQ is enabled/disabled with FX switch
[You can only see part of this thread as you are not logged in to the forums]
Channel EQ is enabled/disabled with FX switch
You do not have the required permissions to view the files attached to this post.
Re: Channel EQ is enabled/disabled with FX switch
I think this would be super useful for all us f...
Re: Channel EQ is enabled/disabled with FX switch
Multiple scenarios are possible on this one ind...