Ender's Plugin Suite 2.0

Share your Patcher presets here

Return to “Patcher - Presets”

[You can only see part of this thread as you are not logged in to the forums]
ENDER1805
Thu May 18, 2023 9:56 am

x

Ender's Plugin Suite 2.0

Big update for my Ender's plugin suite !
I decided to rework the engine and the routings of a lot of plugins and realized that the next update could be nothing but a big update. I added 6 new plugins and removed 3 of the already existing ones. See the bottom of this Changelog for more information.
This entire plugin list based on a fantasy or on already existing hardware is freely available to you on these forums. I would really appreciate any comment, suggestion or request. I'll do my best to help if needed :)

ALL the presets are CPU friendly, and they won't add a big latency in your session (the biggest latency i got was 10ms!) and most of them don't add any latency on my computer.

PLEASE read the entire message! It contains useful information about these plugins and some important values you maybe need to know! ALL these plugins work in FL at least Studio 20.9.2 and above!

Here's the plugin list!

------------------------------------------------

Ender's Clap EQ
a simple but effective Eq preset to let you mix your clap samples easily. every band in this preset is placed on key areas where your claps (may) need some EQ.
Key features:
  • Clap EQ is a four bands equalizer
  • Simple gain knob to let you do some gain staging after eqing your sample
  • The High pass maximum value is now limited to 130hz;
  • Each band can now boost/cut up to 6db.
  • A Bypass button
CLAP EQ 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
Hat EQ
The same as Clap EQ, but for hats/crashes. Once again, this preset let you EQ key areas of these samples.
Key features:
  • Hat EQ is a five bands equalizer
  • Simple gain knob to let you do some gain staging after eqing your sample
  • The high pass maximum value is now limited to 200hz;
  • The low pass maximum value is 18.5khz;
  • Each band can now boost-cut up to 6db.
  • A Bypass button
HAT EQ 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
Ender's Kick EQ
A four bands EQ that let you mix your kick drum easily. The four bands will shape your kick to make it sound fuller, bigger, or whatever you want.
Key features:
  • Kick EQ is a four bands equalizer
  • Simple gain knob to let you do some gain staging after eqing your sample
  • Each band can now boost/cut up to 6db.
  • A Bypass button
KICK EQ 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
  • This plugin is now a linear-phase process
Snare EQ
The same as Kick EQ, but for snare sample. It can be tricky to EQ snare samples because they're often made of multiple layers. use this plugin to shape it without getting lost.
Key features:
  • Snare EQ is a four bands equalizer
  • Simple gain knob to let you do some gain staging after eqing your sample
  • The high pass maximum value is now limited to 130hz;
  • The low pass maximum value is now limited to 10khz;
  • The low pass curve is gentler
  • Each band can now boost/cut up to 6db.
  • A Bypass button
SNARE EQ 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
Tom EQ
An EQ preset to mix tom and percussion samples easily. Key areas were selected based on a lot of tom sample to let you shape your samples with ease.
Key features:
  • Tom EQ is a five bands equalizer
  • Simple gain knob to let you do some gain staging after eqing your sample
  • The high pass maximum value is now limited to 130hz;
  • The low pass maximum value is now limited to 8khz;
  • The filter curves are gentler;
  • Each band can now boost/cut 6db.
  • A Bypass button
TOM EQ 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.

------------------------------------------------
Ender's Unique EQ
An analog sounding plugin without big CPU usage and without any latency. This unique EQ let you use unique EQ curves and an automatic saturation inspired by the Pulteq EQ This is NOT an emulation AT ALL !. I only tried to create something analog.
Key features:
  • Apply unique EQ curves with the three EQ bands
  • Use a low pass and a high pass filter
  • You can invert these unique curves
  • You can turn on the reduction mode to reduce the mids frequencies
  • You can make the three main EQ bands sharper
  • You can make the two filters stronger
  • You can turn off the saturation introduced by the plugin;
  • The saturation gives you a smooth warmth.
UNIQUE EQ 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
Ender's Dynamic EQ
This plugin was entirely rebuilt to improve, fix or change a lot of things from the V1.3 engine. Created to dynamically boost/cut frequencies, the dynamic Eq is a great alternative to compression. The latest version includes 7 bell (peaking) curves only with a specific frequency range. Each band can be broad or narrow in some musical way. It means that each band won't be very broad or narrow. The bandwidth range is enough to tame unwanted resonances and boost good frequencies without having extreme settings. The release time goes from very fast (a few ms) to very slow (1.5 second or up). These values are only average values because it's kind of hard to determinate the exact release time.
Key features:
  • band 1 goes from 30 to 80hz;
  • band 2 goes from 85 to 200hz;
  • band 3 goes from 205 to 500hz;
  • band 4 goes from 505 to 1200hz;
  • band 5 goes from 1205 to 5000hz;
  • band 6 goes from 5005 to 10 000hz;
  • band 7 goes from 10 005 to 20 000hz.
  • You can boost/cut up to 12db.
Ender's Mid/Sides EQ
This preset let you mix the mids and the sides of your song separately in an easy-to-use interface. Did you know? Phase issues are often introduced by a stereo low end, or when the stereo field is too wide. using a mid/sides EQ will let you avoid this kind of issue by controlling your stereo field.
Key features:
  • Apply different processing on the mids and the sides separately
  • Use a gain knob to control the volume of these two bands
  • You can bypass the processing of each band separately
  • You can use up to five bands
  • the filters from both EQs are limited to a certain range.
    • The sides high pass maximum value is 110hz;
    • The mid high pass maximum value is limited to 120hz ;
    • the sides low pass filter goes from 18.5khz to 175hz;
    • the mids low pass filter goes from 18.5khz to 150HZ;
  • each band can boost/reduce up to 6db;
  • the filter curves are a bit gentler;
  • The plugin is a Linear phase process.
MID/SIDES EQ 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.

------------------------------------------------
Ender's Warmth Machine
This plugin is made to add warmth to your digital sounds. it makes any song sound analog with its four distortion modes and its light modules from "Ender's Unique EQ" and "Ender's Double Comp". Humans love analog sounding music, and this one will certainly bring you some heat.
Key features:
  • Blend up to four different distortion modes (classic dist., overdrive, harmor dist. and Wave folder)
  • Use a built-in module from "Ender's Unique EQ" and "Ender's Double Comp"
  • You can use a simple bypass button to hear the difference
  • The EQ module has filters limitations: the High pass filter goes from 30 to 150hz. the Low pass filter goes from 19khz to 150hz.
WARMTH MACHINE 2.0 CHANGES:
  • GUI (knobs) changed for better style
Ender's Drive
this simple preset is made to add drive or distortion to your sounds. This plugin can go far in the saturation stage, so be careful! I would personally use it to mix a rock, metal or really driving song.
Key features:
  • The main "drive" knob let you add drive or distortion
  • You can turn on the distortion mode that may destroy your sound depending on the amount
  • A Bypass button
DRIVE 2.0 CHANGES:
  • GUI (knobs) changed for better style
------------------------------------------------
Ender's Sidechain
This plugin is made to add a simple single-band sidechain compression to your instruments. The only thing you must do is connecting your sidechain trigger to your instrument's mixer channel.
Key features:
  • This simple one-knob plugin let you add sidechain compression easily
  • - the plugin has been optimized for a zero-latency usage;
  • - the plugin doesn't introduce unwanted pops. (Audible on low frequencies)
SIDECHAIN 2.0 CHANGES:
  • GUI (knobs) changed for better style
  • Release time changed to 60ms to avoid unwanted clicks/pops

Ender's Multiband Sidechain
Complex thing made easy. This plugin is made to add a multiband sidechain compression to your instrument. The only thing you must do is connecting your sidechain trigger to your instrument's mixer channel.
Key features:
  • This simple patch let you add different sidechain compression amounts for each band easily
  • - the plugin has been optimized for a zero-latency usage;
  • - the plugin doesn't introduce unwanted pops anymore.
MULTIBAND SIDECHAIN 2.0 CHANGES:
  • GUI (knobs) changed for better style
  • Release time changed to 60ms to avoid unwanted clicks/pops
  • This plugin is now a linear phase process
Ender's 4-4 Sidechain
This plugin is made to add a simple single band "four to the floor" sidechain compression to your instrument.
Key features:
  • The only thing you must do is to turn the "amount" knob to add sidechain compression
  • - the plugin has been optimized for a zero-latency usage.
4-4 SIDECHAIN 2.0 CHANGES:
  • GUI (knobs) changed for better style
  • Release time changed to 60ms to avoid unwanted clicks/pops
Ender's Multiband 4-4 Sidechain
This little multiband plugin let you add a simple "four to the floor" sidechain to each band (lows, mids and highs). You don't even need to connect any sidechain trigger to your instrument track: this plugin runs an internal sidechain trigger.
Key features:
  • use three knob to add an advanced sidechain compression to your instruments;
  • use an easy-to-use interface to add clarity instantly;
  • the plugin is made for a zero-latency usage, regardless of the multiband processing.
MULTIBAND 4-4 SIDECHAIN 2.0 CHANGES:
  • GUI (knobs) changed for better style
  • Release time changed to 60ms to avoid unwanted clicks/pops
  • This plugin is now a linear phase process
Ender's Unique Comp
This plugin is a unique compressor that blend an expander with a compressor in one! This plugin can be interesting on atmosphere and on experimental sounds, but don't exclude any other usage!
Key features:
  • Blend an expander with a compressor by turning the "comp amount" knob
  • Add some analog warmth with the "warmth button"
  • You can use up to eight different compression curves
  • You can turn on a limiter mode
NEW: Ender's Alter :
This plugin was made for Techno production, but it can be used anywhere if you want a dirty sound! Based on the Double Comp Engine, this plugin blends expansion and compression in one unique signal. from dynamic changes to extreme grittiness, Alter will bring some analog saturation and turn the most numeric signal into a warm pleasure for the ears.

You'll notice i did a bunch of Multiband plugins in the past. Alter will be one of them too! you'll get more flexibility with this multiband-based engine and get some unexpected results. it all depends on your adjustments!
Key features:
  • blend expansion and compression on each band separately;
  • adapt the volume of each band separately;
  • add a saturation or a distortion with the help of the built-in saturation module.
NEW: Ender's SSL Glue
As you guess, SSL Glue is based on the original SSL compressor that has its unique parameters. I replicated it in this Patcher preset, just to add that iconic compression to my sounds. And you can too! This plugin is NOT analog though.
Key features:
  • Attack goes from 0.01 to 30ms;
  • Release goes from 1 to 200ms;
  • Threshold goes from 0 -40db;
  • Apply up to 30db of gain after the compression;
  • Use a ratio of 2, 4 or 10db : 1.
------------------------------------------------
Ender's Saturated Delay
This preset let you add some delay to your songs, from a simple to a chaotic delay.
Key features:
  • Apply some saturation to your delay
  • Turn on the distorded mode by clicking the "Dist." button
  • You can choose from two kinds of delay (normal and bright)
  • You can add a simple "four to the floor" sidechain compression with the sidechained mode
  • Choose between a classic or a heavy sidechain compression
SATURATED DELAY 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
Ender's Saturated Reverb
This preset let you add some reverb to your songs, from a simple to a really distorded reverb.
Key features:
  • Apply some saturation to your reverb
  • Turn on the distorded mode by clicking the "Dist." button
  • You can choose from two kinds of reverb (normal and bright)
  • You can add a simple "four to the floor" sidechain compression with the sidechained mode
  • Choose between a classic or a heavy sidechain compression
SATURATED REVERB 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
Ender's SpaceVerb
SpaceVerb is a great reverb preset that creates two impressive atmospheres.
Key features:
  • Apply some saturation with the "Warmth" button
  • Turn off the dry signal with the "No Dry" button
  • You can choose from two kinds of reverb (normal and massive)
SPACEVERB 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
  • The built-in LFO has been removed.
Ender's Wash Out
This preset adds a wash out effect. Perfect for buildups.
Key features:
  • Use the wash out knob to add the effect
  • Turn off the original signal by pressing the "No Dry" button
  • You can choose from two kinds of filtering (normal and hard)
  • You can add a bit of warmth by pressing the "warmth" button
WASH OUT 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
  • The monoizer has been updated to bring a more natural feel.
NEW: Ender's Room Reverb
I worked on several reverb plugins in the past, but i never tried to bring an easy-to-configure one before. and what's better than bringing you a simple but effective room reverb? maybe this one with a Hall reverb! this plugin comes with a built-in "Clean Mode" to let you get a mix-ready reverb.

Key features:
  • you can choose from small to large rooms;
  • the decay goes from 200 to 700ms;
  • the predelay goes up to 60ms;
  • Choose between three vibes: Flat, Fresh and Warm;
  • Use the clean mode to get a mix-ready reverb.
NEW: Ender's Hall Reverb
The second new reverb i bring you with this fresh update! based on the same engine as Room Reverb, you'll get a simple but effective hall reverb. this one gets a more advanced clean mode, but every setting is applied in the background. no hard-to-understand interface. it's as clear as the reverb you'll get.

Key features:
  • you can choose from small to large rooms;
  • the decay goes from 2 to 10 seconds;
  • the predelay goes up to 60ms;
  • Choose between three vibes: Flat, Fresh and Warm;
  • Use the clean mode to get a mix-ready reverb.
NEW: Ender's Multiband Room Reverb
This plugin is the Room Reverb's big brother. it includes multiband processing to get an even cleaner result than with the classic Room Reverb. Those two plugins use the same engine, the same routings. There's nothing else to say about it.

Key features:
  • apply different reverb amount for each band;
  • you can choose from small to large rooms;
  • the decay goes from 200 to 700ms;
  • the predelay goes up to 60ms;
  • Choose between three vibes: Flat, Fresh and Warm;
  • Use the clean mode to get a mix-ready reverb.
NEW: Ender's Multiband Hall Reverb
The Hall Reverb plugin's big brother with Multiband processing in Linear phase to avoid phase shifting! It uses the same engine and the same routings as the classic Hall Reverb plugin, so there's nothing that special to tell you.

Key features:
  • apply different reverb amount on each band;
  • you can choose from small to large rooms;
  • the decay goes from 2 to 10 seconds;
  • the predelay goes up to 60ms;
  • Choose between three vibes: Flat, Fresh and Warm;
  • Use the clean mode to get a mix-ready reverb.
------------------------------------------------
Multiband Stereo Tool
This plugin let you work on the stereo field of every sound. This plugin uses the same engine as Ender's Stereo Tool. The latest version brings some improvements and new features.
Key features:
  • change the stereo width of every band separately
MULTIBAND STEREO TOOL 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
  • This plugin is now a linear-phase process to avoid phase shift.
  • You can now make each band wider or thinner like you want.
  • The band panning option has been removed.
Ender's Widener
This preset let you increase the width of a sound without introducing tons of phase issues thanks to the built-in Phase Saver module. The latest version brings a more natural widening your ears will love!
Key features:
  • use the main knob to threat the stereo field
WIDENER 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
  • The Widening process has been improved to bring wider sounds.
Ender's Stereo Tool
Stereo tool let you work on the stereo width of your songs by adding a subtle stereo enhancement. This plugin let you use the "Sub Clarity" mode that will also increase the phase quality by making the bass mono.
Key features:
  • Apply width with the main knob
  • Turn on "Sub Clarity" mode to preserve the phase
  • You can make the entire signal completely mono by pressing the "mono" button
STEREO TOOL 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
------------------------------------------------
Ender's Multigate
Multigate is an eight steps sequencer that let you create gated riffs with a filter and a clean distortion section.
Key features:
  • Use the "volume" gater to create a trance gate effect
  • Use the "filter" gater to automate the cutoff and resonance of each step
  • Use the "Clean Distortion" gater to add extra movement to the sound
MULTIGATE 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
Ender's Rumble Generator
This plugin is a complete mixing chain to create huge Techno rumble basses. Play with distortion, delay, reverb and filters to get the rumble bass you want! The version 2.0 brings you a fully reworked engine. I noticed that the previous mixing chain wasn't that optimized to create Techno Rumble. The latest version offers a stronger result with an optimized engine.
Key features:
  • Blend four different distortion modes (Classic dist., Overdrive, Log Dist. and Crusher)
  • Play with a classic delay and reverb to create the ambience you want for your rumble.
  • Play with a built-in mid/sides EQ to shape your rumble's frequency spread, from mono to stereo basses
  • You can add a mid/sides compression after these previous effects to make the sound more consistent
RUMBLE GENERATOR 2.0 CHANGES:
  • GUI (knobs) Updated for a better style.
  • New processing under the hood.
  • Optimized engine to lower the CPU usage.
------------------------------------------------
ENDER PLUGIN SUITE DEPRECATED PLUGINS
Here is a list of all the deprecated plugins from the Ender Plugin Suite. You can find all the details about the various plugins that have been part of this plugin suite. Please keep in mind that this list can change at any time. You'll find basic information about the deprecated plugins AND you'll find a link to the Plugin Suite archive to download those plugins if you want. One more time, the archive and/or the information are subject to change. Enjoy your reading.
--

MULTIBAND NOISE GATE:
This plugin was never finished due to the complexity of the noise removing process. A simple noise gate would have removed unwanted audio, but i wanted to get something a bit more effective to remove those sounds even if the gate was open by the voice. Did i succeed? No, and that's why this plugin is there. It's deprecated before it gets released. It was probably a too advanced task for Patcher (this is written in May 2023).

Plugin Description:
Multiband tool to remove unwanted noises from a recording. This is a preset WITHOUT ANY GUI ! You only see what's under the hood. This one is still under "development», and I’d like feedbacks on the wanted features :)
--

Ender's Multiband Reverb:
This plugin was made for those who wanted a clean reverb. while it brings nice and clear reverbs, this plugin misses a LOT of control about the various parameters available. Ender's Multiband Reverb is replaced by Ender's Multiband Room Reverb and Ender's Multiband Hall Reverb. These two new plugins offer many more options and brings better results in less time. The classic Multiband Reverb plugin wasn't that useful to me, or it was at least hard to know the exact value of some parameters.

Plugin Description:
This plugin let you add different reverb amount on three bands (lows, mids and highs). This plugin also has some more options:
--

Ender's Double Comp:
Double Comp offers the opportunity to get two compressors in the same plugin. The idea is not new at all, but the specific feature of this plugin was the Automatic Compressor module included. That compressor adapts the attack and the release depending on the input signal. It would have been great if it were easy to make and easy to get working properly. Thos who used it probably noticed that the results weren't so great, and that's why Ender's Double Comp gets deprecated.

Plugin description:
This unique compressor let you blend two different compressors in one: a simple compressor with an automatic compressor! The automatic comp is NOT an emulation AT ALL !. This tool may look complex, but it’s finally a simple tool that sounds good!
--

------------------------------------------------
I hope you'll enjoy these plugins.

Ender
Last edited by ENDER1805 on Mon Jul 10, 2023 7:41 pm, edited 1 time in total.

Omnifold
Mon May 22, 2023 3:43 am

x

Re: Ender's Plugin Suite 2.0

Great Job on all these. Some tips for you. 1....

The-Doctor
Tue May 23, 2023 4:11 pm

x

Re: Ender's Plugin Suite 2.0

The bypass button of warm machine 2.0 doesn't w...

ENDER1805
Tue May 23, 2023 6:42 pm

x

Re: Ender's Plugin Suite 2.0

Omnifold wrote: ↑Mon May 22, 2023 3:43 am Great...

ENDER1805
Tue May 23, 2023 6:44 pm

x

Re: Ender's Plugin Suite 2.0

The-Doctor wrote: ↑Tue May 23, 2023 4:11 pm The...


Return to “Patcher - Presets”