I wonder why I'm just noticing this now, after years of using the Fruity Limiter's compressor. The output is a couple decibels over the threshold, even with a 20:1 ratio. What's going on?
The input [pre-compressor] is -6db.
The compressor threshold is set to -15db.
But the compressor output is -13db.
The only thing that gets the output down closer to -15db is setting the Sustain knob below 1ms. Anything above 1ms and the output is back to -13db.
Maybe there's nothing wrong with the plugin, I just need remedial Principles of Compression lessons or something. But I figure the compressor should behave like a hard limiter with that ratio and attack. What am I getting wrong? Advice appreciated.
Fruity Limiter's compressor: threshold ineffective
Return to “FL Studio Users Forum (Looptalk)”
Forum rules
Please read them here.
Please read them here.
[You can only see part of this thread as you are not logged in to the forums]
Fruity Limiter's compressor: threshold ineffective
You do not have the required permissions to view the files attached to this post.
Re: Fruity Limiter's compressor: threshold ineffective
i'm unable to say exactly why, but the Sustain ...
You do not have the required permissions to view the files attached to this post.
Re: Fruity Limiter's compressor: threshold ineffective
Thanks so much Levendis, this is very helpful f...
You do not have the required permissions to view the files attached to this post.
Re: Fruity Limiter's compressor: threshold ineffective
The integration time may be dampening the follo...
Re: Fruity Limiter's compressor: threshold ineffective
I admit I don't quite follow your explanation, ...
You do not have the required permissions to view the files attached to this post.
-
Scott
- Site Admin
- Tue Nov 11, 2025 11:48 pm
Re: Fruity Limiter's compressor: threshold ineffective
pbali wrote: ↑Tue Nov 11, 2025 6:59 pm
I just n...
Re: Fruity Limiter's compressor: threshold ineffective
Thanks Scott, attached. This is the sine tone ...
You do not have the required permissions to view the files attached to this post.
-
shroomhead_one
- Content Creator
- Wed Nov 12, 2025 6:09 am
Re: Fruity Limiter's compressor: threshold ineffective
levendis wrote: ↑Tue Nov 11, 2025 9:24 pm
Incid...
Re: Fruity Limiter's compressor: threshold ineffective
shroomhead_one wrote: ↑Wed Nov 12, 2025 6:09 am...
Re: Fruity Limiter's compressor: threshold ineffective
@pbali : the effect depth is influenced when Su...
Re: Fruity Limiter's compressor: threshold ineffective
Hi. This seems to be because the compressor sec...
You do not have the required permissions to view the files attached to this post.
Re: Fruity Limiter's compressor: threshold ineffective
Well I'm mostly annoyed with myself, that I did...
Re: Fruity Limiter's compressor: threshold ineffective
pbali wrote: ↑Wed Nov 12, 2025 11:41 am
My prac...
Re: Fruity Limiter's compressor: threshold ineffective
In that first example of mine, the output signa...
Re: Fruity Limiter's compressor: threshold ineffective
pbali wrote: ↑Thu Nov 13, 2025 4:21 am
In that ...
Re: Fruity Limiter's compressor: threshold ineffective
levendis wrote: ↑Thu Nov 13, 2025 5:09 am
Susta...
Re: Fruity Limiter's compressor: threshold ineffective
4mB wrote: ↑Thu Nov 13, 2025 8:52 am
levendis w...
Re: Fruity Limiter's compressor: threshold ineffective
levendis wrote: ↑Thu Nov 13, 2025 10:33 am
i gu...
Re: Fruity Limiter's compressor: threshold ineffective
Sorry to belabor this, but is this behavior exp...
You do not have the required permissions to view the files attached to this post.
Re: Fruity Limiter's compressor: threshold ineffective
pbali wrote: ↑Thu Nov 13, 2025 8:22 pm
Sorry to...
You do not have the required permissions to view the files attached to this post.
-
shroomhead_one
- Content Creator
- Fri Nov 14, 2025 8:11 am
Re: Fruity Limiter's compressor: threshold ineffective
pbali wrote: ↑Thu Nov 13, 2025 8:22 pm
Sorry to...
Re: Fruity Limiter's compressor: threshold ineffective
Thanks for checking the MCompressor, levendis!
...