Arturia Beatstep and endless encoders

Discuss MIDI Controller support/issues here.

Return to “MIDI Controller Support”

[You can only see part of this thread as you are not logged in to the forums]
tryti88
Tue Jun 20, 2017 7:29 pm

1 x

Arturia Beatstep and endless encoders

Hi, I'm having trouble using the encoders on my beatstep in relative mode. The encoders can be configured to absolute, relative #1, relative #2 and relative #3 modes:
Absolute: turning the knobs sends everything from 0 to 127
relative #1: clockwise sends 51%, counter-clockwise sends 50%
relative #2: clockwise sends 0%, counter-clockwise sends 100% (I don't know why it's in reverse)
relative #3: clockwise sends 12%, counter-clockwise sends 13%

I tried messing around with the mapping formula, but I can only ever get the knob to turn in one direction when I tweak the encoder.

I can use encoders in absolute mode sort of like normal knobs, but when I use one encoder on more than one channel, it doesn't save the value between channels. So if I on channel 1 turn it to 0%, then switch to channel 2 and set turn it to 100%, then switch back to channel 1, it'll continue from the 100% position instead of the 0% position.

Thanks in advance!

tryti88
Wed Jun 21, 2017 6:07 am

0 x

Re: Arturia Beatstep and endless encoders

I realized I posted in the wrong forum. Can thi...

leonpgp
Sat Sep 02, 2017 1:56 pm

1 x

Re: Arturia Beatstep and endless encoders

This can be fixed by using MIDI translation sof...

Scoox
Wed Oct 04, 2017 8:44 am

4 x

Re: Arturia Beatstep and endless encoders

What FL Studio needs is to check what most manu...


ggray
Tue Feb 12, 2019 3:01 pm

0 x

Re: Arturia Beatstep and endless encoders

HEYYY!!!!!! ALERT WILL ROBINSON!!!! I tri...


Return to “MIDI Controller Support”