Quick question, the output of Sytrus FX tab can be sent to mixer channels, but it seems it may need some work:
● Scroll all the way down: send channel number goes to -100 (actually it displays -..0 because -100 doesn't fit)
● Scroll all the way up: send channel number goes to 103, but now FL has 125 mixer channels, so this would need tobe updated.
● Setting the send channel number to, say, 1 does not mean the output of the Sytrus FX module is sent to mixer channel 1, it means if Sytrus is set in the Channel Rack to output on mixer channel 15, then the FX module will output to channel 15+1 = 16. Likewise, setting this to -1 will result in the FX module output going to mixer channel 15-1 = 14. Is this intentional? I was expecting this number to be an absolute channel number reference, not relative.
find/exchange/discuss Sytrus presets & tips here
3 posts • Page 1 of 1
[You can only see part of this thread as you are not logged in to the forums]
Scoox wrote: [...] Setting the send channel num...
Thanks for answering. The way this was implemen...